4200 + comes in caulking tube Jack
Posted by: onnopaddle on May-07-13 2:53 AM (EST)
Let it all dry out of can and even if you have to buy a sanding disc ... Just get one so you can slide it under in and out a few times to sand for prep and kick out and grit ... You could always do this with hacksaw blade too but do what you can to get the grit out first as it will just poke and prod hull right there forever with you sitting on it ... Or at least pull the seat up a little more and jam the hose in there ... Keep it pried up to dry out then sand
Double mask off the whole area ... Jam the 4200 in there and only need light pressure on seat .. Couple bricks or gallon jug ... Let the excess squeeze out and do a nice fillet and pull the first tape ... Repeat for even nicer fillet and pull THAT tape ... What remains should be perfect or can be brought up to concours level.
First Need Purifier
Sport Cases (Electronics)
Hardshell Kayak Sail Rigs
|Table of Contents|