Your #1 source for kayaking and canoeing information.               FREE Newsletter!
my Profile

Advice, Suggestions and General Help New Topic Printer Friendly Version

  Quick and dirty but will come out
  Posted by: onnopaddle on Apr-26-13 9:07 PM (EST)

-- Last Updated: Apr-26-13 9:09 PM EST --

nice fix ...

Relief cut all those big cracks and patches tape ( masking ) over on outside and fix from inside. Same on bow / stern, seams etc. ... No need go crazy.

Next is 36 grit ... YES 36 grit the whole outside as hard as you want. Take EVERYTHING OFF down to bare, original glass. Suit up and go nutz. Fill / fix all the big gouges with West 410 or something EZ to sand. Do everything + maybe any other glassing if ness. Using softer pad with 60 or 80 sand the whole thing again fairing these filled in spots.

The glass over the whole thing with pigmented resin and call it a day.

 Great Products from the Buyers' Guide:

Deck Rigging Gear

Canoe/Kayak Carts

Shirts / Tops

Touring Sprayskirts

Table of Contents


Follow us on:
Free Newsletter | About Us | Site Map | Advertising Info | Contact Us


©2015 Inc.