Your #1 source for kayaking and canoeing information.               FREE Newsletter!
my Profile
 





Luxury Kayaking Trips
ORCA WHALES, EAGLES
SAN JUAN ISLANDS
www.crystalseas.com/InnToInn
 
Advice, Suggestions and General Help New Topic Printer Friendly Version

  cutting the cable
  Posted by: Jaybabina on Feb-22-13 7:42 AM (EST)
 

-- Last Updated: Feb-22-13 7:44 AM EST --

If you remove the entire cable and work on a bench, you can cut the cable holding it in a vice and using a hacksaw. A Dremel tool with a small stone wheel is the best. That's how I would do it if you are working in the boat. The crimp ends can be bought a any good hardware store or the Depot. Look in the area where they sell cable or where they have those rows of flat draws with all the different fasteners. Your cable is stainless and if you need that go to a boating store. That kind of cable is used for sail boat rigging.


 Great Products from the Buyers' Guide:

EZ Launch® Kayak & Canoe

Pull-Up Strap Handle Kit

Gedi Convertible Helmet

Heel and Pegpads™

Overstock Outlet Foods

Table of Contents

Google
 
Web Paddling.net


Follow us on:
Free Newsletter | About Us | Site Map | Advertising Info | Contact Us

Sweepstakes

©2014 Paddling.net Inc.