Your #1 source for kayaking and canoeing information.               FREE Newsletter!
my Profile
 





Point65 Mercury 2013 Clearance Sale!
Mercury modular touring kayak
Solo $899/Tandem $1199 - save $3-600!
Shop online...
 
Advice, Suggestions and General Help New Topic Printer Friendly Version

  I thought I saw it on your blog! :-)
  Posted by: kayak_bob on Feb-20-13 1:05 AM (EST)
 

Thanks again Gnarly Dog!

I thought I saw this idea on your blog a while ago :-)

From looking at your retrofits, it looks like you put the toggles pretty far at the ends of the kayak? It looks like one of the holes were drilled near/on the deck/hull seam. Have you noticed any odd issues because of this? If I were to follow a similar scheme - I would be putting the toggles at these locations?:
http://bobchu.com/temp1/Bow-Toggle_Location_1.jpg
http://bobchu.com/temp1/Stern-Toggle_Location_1.jpg


I was thinking of looping the line through the toggle, binding the 2 lines together so I don't accidentally put a finger through them and having a bungee holding the handle taught on the deck. - it looks like you have one line connecting to the toggle - any issues with balance?

Thanks again!,

Bob

 Great Products from the Buyers' Guide:

Adventure Sailrigs

Classic Freestanding Rack

Dry Bags

YakCatcher Rod Holder

PFD's (Life Jackets)

Table of Contents

Google
 
Web Paddling.net


Follow us on:
Free Newsletter | About Us | Site Map | Advertising Info | Contact Us

©2014 Paddling.net Inc.
Sweepstakes Shirt Sale