Posted by: LeeG on Feb-19-13 9:54 PM (EST)
I would much rather put one 10-24 ss machine screw through the deck with finish washer on top and small fender washer underneath holding a loop of folded 1" webbing than a plastic eyelet held with two screws. It won't stick up as much and you can configure one or two loops to hold any number of lines or bungies.
Don't drill another hole or attach another eyelet in the bow. Try a shackle or make a spliced o ring of braided line you can attach handle and perimeter line to.
Deck Rigging Gear
Pull-Up Strap Handle Kit
|Table of Contents|