box? - Canoeing / Kayaking

Sawyer Paddles and Oars:

Family kayak vacations this summer
San Juan Islands
See Whales & Eagles
www.crystalseas.com/InnToInn

Advice, Suggestions and General Help

New Topic

Printer Friendly Version

box?
Posted by: suiram on Feb-06-13 1:10 PM (EST)

I saw DIY surfboard thermocure project were a guy built a heat box out of 1inch rigid insulation. I can't recall details, but he was happy with results. He was able to get temperatures high enough for his purposes, that will definitely be enough just to get epoxy set.
(polystyrene melts at 460F)

Table of Contents

Heat Delima - Ideas? - emanoh - Feb-06-13 9:17 AM
- I use an electric space heater - pblanc - Feb-06-13 9:28 AM
- Use halogen lights - redmond - Feb-06-13 9:39 AM
  - I had very bad results doing this .... - seadart - Feb-06-13 2:32 PM
- 2c - suiram - Feb-06-13 10:33 AM
  - COLD- If the reaction quenches - seadart - Feb-06-13 2:35 PM
- LP gas space heater ..... - pilotwingz - Feb-06-13 10:53 AM
  - Follow up. - emanoh - Feb-06-13 12:52 PM
    - Tarp - emanoh - Feb-06-13 12:57 PM
      - box? - suiram - Feb-06-13 1:10 PM
    - Comment on Kerosene - guideboatguy - Feb-06-13 1:14 PM
      - Kerosine - emanoh - Feb-06-13 2:14 PM
        
        The smaller the heater, the less exhaust - guideboatguy - Feb-06-13 3:40 PM
        
        Project - emanoh - Feb-06-13 4:49 PM
        
        No smell - aamapes - Feb-06-13 8:05 PM
- Project priority - Steve_in_Idaho - Feb-06-13 11:47 PM
  - propane - seakayaking - Feb-06-13 11:58 PM
    - Yes, that. - Steve_in_Idaho - Feb-07-13 12:53 AM
      - propane , LP gas .... - pilotwingz - Feb-07-13 1:29 PM
- Hard-wire one of these in: - lewesbound - Feb-09-13 10:21 AM
- If you can vent exhaust to the outside - kayamedic - Feb-09-13 11:45 AM