no vac needed. - Canoeing / Kayaking

Elie Sport:

THUNDER BAY & NORTHWEST ONTARIO
Limitless imagination...
meets endless inspiration
www.visitthunderbay.com

Advice, Suggestions and General Help

New Topic

Printer Friendly Version

no vac needed.
Posted by: Phrogman on Dec-30-12 8:25 PM (EST)

Bart,
No you don't really need the vaccum baggibg, in fact I couldn't figure out how to incorporate bagging and my jig that I used to hold the paddle straight and in plan. The bagging of ply 2 and 3 only sucks out any excess epoxy. So at worst the finished paddle weighs a few grams more than one that wasn't bagged

Table of Contents

Greenland paddle carving - hodtay - Dec-25-12 8:15 PM
- For The Rough Stuff... - VK1NF - Dec-25-12 8:58 PM
  - Electric hand planer - hodtay - Dec-25-12 9:15 PM
    - Electric hand plane - Jaybabina - Dec-26-12 8:30 AM
- Stanley surform plane with - bartc - Dec-25-12 10:02 PM
- I always enjoyed making greenland - dong - Dec-25-12 10:40 PM
- If you have a jointer... - bnystrom - Dec-26-12 7:23 AM
- Thanks - hodtay - Dec-26-12 12:21 PM
  - Or you could just "man-up" - t.george - Dec-26-12 3:04 PM
    - Late answer. Electric plane again. - string - Dec-26-12 6:49 PM
  - The jointer is only used for... - bnystrom - Dec-27-12 7:33 AM
    - love those long ribbons of cedar - qajaqer2 - Dec-27-12 8:30 AM
      - Power tools=cedar dust-be cautious - ret603 - Dec-27-12 10:20 AM
- Greenland Paddle Carving - vipaddles - Dec-27-12 10:15 AM
  - spoke shave, WRC dust - hodtay - Dec-27-12 1:15 PM
    - cedar dust - ret603 - Dec-28-12 9:17 AM
- alternate construction - Phrogman - Dec-27-12 9:23 PM
  - Hmmm - TomM - Dec-28-12 8:05 PM
    - HMMM - Phrogman - Dec-29-12 8:47 AM
  - Carbon sleeve - ebanista - Dec-29-12 7:57 PM
    - how to - Phrogman - Dec-30-12 5:23 PM
      - I've been thinking of this method - bartc - Dec-30-12 6:25 PM
        
        no vac needed. - Phrogman - Dec-30-12 8:25 PM
      - Sounds do-able - ebanista - Dec-30-12 9:30 PM
        
        video - Phrogman - Dec-31-12 2:12 PM
- I use - dajarr - Dec-28-12 1:39 PM