Your #1 source for kayaking and canoeing information.               FREE Newsletter!
my Profile

Advice, Suggestions and General Help New Topic Printer Friendly Version

  C.E. Wilson might know. Also,
  Posted by: ezwater on Dec-24-12 9:35 PM (EST)

-- Last Updated: Dec-24-12 9:37 PM EST --

Plexus may have info on a web site.

Tell us what sort of object, and the area and shape of the base where the adhesive is.

If I knew I couldn't heat it, one approach might be to groove through the glued-on object with a Dremel of with one of those vibrating blade cutters. In some cases, if the thing to be removed is in an accessible spot, a hand saw, such as a small dovetail saw, could be used to cut grooves.

They should be close-spaced, no more than 1/2" apart, and deep enough to come *very* close to the glue layer. It might even be desirable to cross-hatch the piece.

If the piece-to-be-removed is not shaped for grooving, you might have to saw most of it off, with a horizontal saw cut. Then cut the groove.

Then the piece can be pried up, bit by bit, using a chisel or bull nose plane at a low angle.

Now, if you don't want to lose the piece-to-be-removed, you are in deep trouble.

 Great Products from the Buyers' Guide:

2-Boat Free-Standing

Dry Tops

Electric Kayak Motor

Kayak Sak

Table of Contents


Follow us on:
Free Newsletter | About Us | Site Map | Advertising Info | Contact Us


©2015 Inc.