Your #1 source for kayaking and canoeing information.               FREE Newsletter!
my Profile
 





Bicycle and Kayak along Island Shores
San Juan Islands
See Whales & Eagles
www.crystalseas.com/BikeKayak
 
Advice, Suggestions and General Help New Topic Printer Friendly Version

  Hate sanding FG...
  Posted by: openboater on Dec-10-12 8:44 AM (EST)
 

I will do most anything to minimize any fiberglass sanding. Peel Ply is my go to method. And it shortens repair time in most cases.

These fractures were jagged and disfigured (most likely the result of the first repair). I work in cold temps and the glue sets up quick. I can hold the fractures/hull in place by hand for the time it takes to set up. I make sure there's no glue bumps in the layup, otherwise you can bury a little bit of glue in the lay up no problem.



 Great Products from the Buyers' Guide:

Paddling Gloves

ParkerMount

2-3 Canoe/Kayak Trailer

Dry Bags

URCHIN Portable Anchor

Table of Contents

Google
 
Web Paddling.net


Follow us on:
Free Newsletter | About Us | Site Map | Advertising Info | Contact Us

Sweepstakes

©2014 Paddling.net Inc.