I used an oil-varnish blend - Canoeing / Kayaking

Family kayak vacations this summer
San Juan Islands
See Whales & Eagles
www.crystalseas.com/InnToInn

Advice, Suggestions and General Help

New Topic

Printer Friendly Version

I used an oil-varnish blend
Posted by: bnystrom on Nov-02-12 7:11 AM (EST)

It's the same 50:50 blend of tung oil and varnish that I use on all of my paddles. The finish does wear off, but it's quick and easy to renew. The underlying oak is hard enough that it never wore appreciably.

Table of Contents

Edge protection for wood paddles - string - Oct-30-12 6:50 PM
- I use epoxy glue - gnarlydog - Oct-30-12 7:23 PM
- What's Rockgard? - booztalkin - Oct-30-12 9:47 PM
  - Related info - guideboatguy - Oct-31-12 10:23 AM
    - Eric - vic - Nov-01-12 4:57 PM
      - That's the one - guideboatguy - Nov-02-12 8:06 AM
- Helicopter tape is useless - bnystrom - Oct-31-12 7:30 AM
- Similar to epoxy - guideboatguy - Oct-31-12 10:33 AM
- The best edge protection I've had is ash - g2d - Oct-31-12 10:05 PM
  - Oak works, too - bnystrom - Nov-01-12 7:11 AM
    - Ash n Oak ... What was the finish - onnopaddle - Nov-01-12 12:53 PM
      - The ash edging was not glassed, but - g2d - Nov-01-12 4:25 PM
      - I used an oil-varnish blend - bnystrom - Nov-02-12 7:11 AM
  - Ash makes a lot of sense. - steve_in_idaho - Nov-02-12 5:11 AM
    - Ash shines for steam-bending. - tktoo - Nov-02-12 11:09 AM
      - All wood dulls tool steel. - steve_in_idaho - Nov-02-12 12:45 PM
        
        You know what I meant. - tktoo - Nov-02-12 1:29 PM
        
        Well, okay.. - steve_in_idaho - Nov-02-12 2:13 PM
        
        Try teak in comparison. - tktoo - Nov-02-12 3:34 PM
        
        Harder to steam bend and glue, too, no? - g2d - Nov-02-12 4:31 PM
        
        I think you're right. - tktoo - Nov-03-12 10:54 AM
        
        The reason teak is tough on tools... - Bnystrom - Nov-04-12 9:36 AM
        
        I won't buy tropicals unless necessary. - tktoo - Nov-04-12 10:02 AM
        
        Or ironwood! - steve_in_idaho - Nov-02-12 4:39 PM
- automotive door guard - Mcimes - Nov-01-12 5:15 PM
  - Door guard advantage - cushionining - Kocho - Nov-02-12 4:18 PM
- fiberglass and epoxy? - melenas - Nov-01-12 8:45 PM
  - Glass fibers will add "something". - g2d - Nov-01-12 11:25 PM
    - I rarely use ash for edging - mornstein - Nov-04-12 9:35 AM
      - My mistake. - tktoo - Nov-04-12 6:34 PM
- Insist on Dynel Edges - clydehedlund - Nov-04-12 6:17 PM
  - Those of us who have worked with - g2d - Nov-06-12 7:42 PM
    - So Far So Good - clydehedlund - Nov-07-12 3:40 PM
- I used Ipe on the last one ........ - pilotwingz - Nov-06-12 7:04 PM