You are responding to the following review:
Submitted: 02-16-2012 by Ossie
Have only been paddling my Yukon expedition for a month or so. This is my third Prijon and to address the seat issue, The inserts for backrest need to be opened up so the unit drops in full depth. The seat adjuster (which is not a problem on the glass models) needs to be slightly packed between the outer hpt and the black inner moulding, and the threaded plates that the 8mm allen keyed bolts screw into, need additional nuts welded to increase thread volume for a very tight screw up. Throw away the fibre type washer inside, it is another weak link. Am enjoying the Yukon, it is a different boat in the Sydney area, with an average speed of 7kmh over longer paddles.
* All you need to do is submit the form above and an email message will be sent to the owner of the ad you are enquiring about.